 |
4KW Single Phase Solar Pump Inverter 220VAC Output For Water Supply
Product Details:
| Place of Origin: | Guangdong,China |
| Brand Name: | ZK/ZUN |
| Certification: | CE,IEC,ISO |
| Model Number: | SG600-4K0GB-2S |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1pcs |
|---|---|
| Price: | Negotiation |
| Packaging Details: | Wooden case,Paper case |
| Delivery Time: | 3-5 work days |
| Payment Terms: | T/T, Western Union,Paypal |
| Supply Ability: | 3000pcs per week |
|
Detail Information |
|||
| Output Voltage: | 220VAC | Output Frequency: | 0-50HZ/60HZ |
|---|---|---|---|
| Application: | Water Supply | Type: | DC/AC Inverters |
| Protection: | 20 Kinds Of Protection | Rater Power: | 4KW |
| Output Current: | 10A | Disply: | LED+LCD |
| High Light: | 220VAC Single Phase Solar Pump Inverter,4KW Single Phase Solar Pump Inverter |
||
Product Description
220VAC Output 4Kw 10A Single Phase Inverter For Water Supply Solar Pump Inverter
Solar Pumping System overview
SG600 series Solar Pump Inverter is based on S100 series frequency inverter and widely used for solar pump system.
Composed of a PV generator, a pump and a solar pump drive. Based on the design philosophy that it is more efficient to store water rather than electricity, there is no energy storing device such as storage battery in the system.
According to the change of intensity of sunlight, solar pump inverter system adjusts output frequency in real time, output power close to the sun cell array maximum power.
Several advantages of SG600 solar pump inverter
Maximum power point tracking (MPPT) with fast response speed and stable operation.
Enable to drive for PMSM high speed and high efficiency pumps without motor ID auto tuning.
Dry run (under load ) protection, lowest speed auto tuning , Pumps maximum current protection, Minimum power input protection...
The PQ (power/flow) performance curve enables to calculate the flow output from the pump.
Dual mode AC and DC power supply input is available.
Digital signal of water level sensor and analog signal of water level sensor for water tank fulling detect.
Dedicated hardware design with dual CPU, independent air duct design.
Import IGBT module such as Infineon/Fuji to ensure good quality.
Enhanced lightning protection module.
GPRS remote control module for distance monitoring, control, parameters modification etc.
Efficiency is higher than 99.5%, power factory not less than 0.96 for below 15kw inverter.
Applications
Application in the water suply system which is composed of a PV generator, a pump and a solar pump drive. Based on the design philosophy that it is more efficient to store water rather than electricity, there is no energy storing device such as storage battery in the system. Fully automatic system using variable speed drive compatible with AC, 1 /3-phase, submersible and surface mount pumps, and high efficiency PMSM Pumps. It is the best solution of solar water supply.
Technical Specification
| Recommended MPPT voltage range | Vmpp 131 to 350 VDC for 1S (80V to 350VDC input, 3PH 110 to 220VAC output) Vmpp 280 to 375VDC for 2T ( 150V to 350VDC input, 3PH 220 to 240VAC output) Vmpp 486 to 800 VDC for 4T ( 250V to 900VDC input, 3PH 380 to 460VAC output) |
|||||||||
| Recommended input voltage (Voc and Vmmp) | Voc 180(VDC), Vmpp 155(VDC) for 1S model or 110V AC pumps Voc 355(VDC), Vmpp 310(VDC) for 2T model or 220V AC pumps Voc 620(VDC), Vmpp 540(VDC) for 4T model or 380V AC pump |
|||||||||
| Motor type | Control for permanent magnet servo motor and asynchronous motor pumps. | |||||||||
| Input power | DC power from solar arrays or AC grid power | |||||||||
| Maximum DC power input | 450VDC for 220-240VAC output /900VDC for 380-460VAC output | |||||||||
| Rated output voltage | 3-phase , 110V/160V/220V. 3-phase, 220V/240V/380V/460V/480V | |||||||||
| Output frequency range | 0~50/60Hz | |||||||||
| MPPT efficiency | 97%, | |||||||||
| Ambient temperature range | (G-type inverter with submersible pumps, and P type for general pumps. | |||||||||
| Solar pump control special performance | MPPT ( maximum power point tracking), CVT (constant voltage tracking), auto/manual operation, dry run protection, low stop frequency protection, minimum power input, motor maximum current protection, flow calculating, energy generated calculating |
|||||||||
| Protection function | Phase loss protection, phase short circuit protection , ground to phase circuit protection , input and output short circuit protection. Stall protection |
|||||||||
| Protection degree | IP20, Air force cooling | |||||||||
| Running mode | MPPT , CVT, variable frequency mode | |||||||||
| Altitude | Below 1000m; above 1000m, derated 1% for every additional 100m. | |||||||||
SG600 solar pump inverter nameplate
SG600 solar pump inverter voltage range
| Model |
Applicable for pumps |
Input DC voltage |
Over voltage point |
Under voltage point |
Suggest Vmp |
Suggest Voc |
| SG600-2S | For 220V AC | 150V – 450V | 450V | 100V | 310VDC | 380VDC |
| SG600-4T | For 400V AC | 250V– 800V | 800V | 200V | 520VDC | 650VDC |
Input voltage, total power solar arrays selection
| Input voltage, power solar arrays selection | |||||||
| Pumps model | Inverter models | Vmp | Voc | Total Power of solar arrays | |||
| 110VAC pumps | 1S | 110*1.41=130VDC | 156VDC | ≧ (1.3 to 2.0) rated power of pumps It is also depend on the quality of solar panels.The more power input,the better performance. |
|||
| 220VAC pumps | 2S | 220*1.41=310VDC | 372VDC | ||||
| 380VAC pumps | 4T (Max 800VDC) |
380*1.41=540VDC | 648VDC | ||||
| 480VAC pumps | 4T ( Max 900VDC) |
480*1.41=677VDC | 812VDC | ||||