DC AC 220V 3 HP 10A MPPT VFD Solar Pump Inverter For Submersible Surfact Pump
|Place of Origin:||China|
|Brand Name:||ZK ZUN|
|Certification:||CE IEC ISO|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 Piece|
|Price:||USD 85-120 per piece|
|Packaging Details:||Carton box with flim|
|Payment Terms:||T/T, L/C, Western Union,, D/P|
|Supply Ability:||2000pcs per week|
|Inverter Type:||Solar DC/AC Inverter||MPPT Efficiency:||Built In|
|Input Voltage Range:||150-440VDC Or 0-220VAC||Output Voltage:||3phase 0-220VAC|
|Inverter Power:||2.2KW 10A||Moter Type:||Submersible Or Surfact Pump|
|Output Frequency:||0-50/60HZ||Application:||Solar Water Pumping|
3 HP MPPT VFD Solar Pump Inverter,
10A MPPT VFD Solar Pump Inverter,
3 Hp Inverter
220V 3HP 10A AC DC Single 3 Phase MPPT Solar Pump VFD Inverter
ZK SU100 series solar water pump VFD inverter mainly features:
- Drives well all kind of AC pumps in solar pumping system.
- MPPT efficiency more than 99%.
- Multiple control modes, local control, auto start/stop, GPRS remote control.
- Dry run (under load ) protection, Water tank fulling detect, Maximum current of pump protection
- Low stop frequency protection, sleep/ wake up function when lack/enough of sunlight radiation.
- Dual mode input, compatible with DC and AC power input, low and wide range voltage input.
- The PQ (Power/Flow) performance curve enables calculating the flow output from the pump
- Multiple pumps protection function, short circuit, phase missing, over current, over voltage...
- Ambient temperature for using: -10 to +55˚C.
How to select the solar panels? need enough DC voltage and Input power at same time.
|Input voltage, power solar selection|
|Pumps model||Inverte models||Vmp||Voc||Total Power of solar arrays|
|110VAC pump||T1 (for 110V)||130VDC||156VDC|
≧ (1.3 to 2.0) rated power of Pump
|220VAC pump||T2 (for 220V)||310VDC||372VDC|
|380VAC pump||T3 (for 380V)||540VDC||648VDC|
Although solar pump inverter built in high efficiency MPPT tracking arithmetic, up to 99% MPPT efficiency, but also
|Power input||Voltage, frequency|
T1: 90V DC to 400V DC or 110V±15% AC, 50/60Hz
|Allowable fluctuations||voltage unbalance rate:<3%; Frequency:±5%; aberration rate: as IEC61800-2 required|
|Power factor||≥0.94(with DC reactor)|
|Output||Output voltage||Output under rated condition: 3 phase, 0～input voltage, inaccuracy<5%|
|Output frequency range||0-50/60HZ. (0-600HZ for PMSM)|
|Output frequency accuracy||Max frequency ±0.5%|
|Overload capacity||G type: 150% rated current/1 min, 180% rated current/10s, 200% rated current/0.5s|
|Main control performance||Motor control mode||V/F without PG , VC without PG , VC with PG|
|Speed control range||Vector control without PG, rated load 1:100;Vector control with PG, rated load 1:1000;|
|Steady speed accuracy|
VC without PG: ≤2% rated synchronized speed;
VC without PG: when 0.5Hz, 150% rated torque;
VC without PG: ≤20ms;
Digit setting: max frequency×±0.01%;
Digital setting: 0.01Hz;
|DC braking capacity|
Starting frequency:0.00～50.00Hz; Braking time:0.0～60.0s;
|Torque boost capacity|
Auto torque upgrade 0.0%～100.0%;
|V/F curve||4 modes: one linearity torque characteristic curve ,one self-setting V/F curve mode, one drop torque characteristic curve (1.1- 2.0 powers),and square V/F curve mode.|
2 modes: linear Acceleration/Deceleration and S curve Acceleration/Deceleration.
|Rated output voltage||Rely on power supply voltage compensate function, while motor rated voltage is 100%, set it at the range of 50-100%(output can not over input voltage).|
|Voltage auto-adjustment||While power supply voltage fluctuates, it can auto-keep constant output voltage.|
|Auto energy-saving running||While under V/F control mode, according to load situation, auto-optimize output voltage to save energy.|
|Standard functions||PID control, speed track, power off restart, jump frequency, upper/lower frequency limit control, program operation, multi- speed, RS485, analog output, frequency impulse output.|
|Frequency setting channels||Keyboard digital setting, keyboard potentiometer ,Analog voltage/current terminal AI1,AI2, Communication given and multi-channel terminal selection, Main and auxiliary channel combination, expansion card, supporting different modes switch.|
|Feedback input channel|
Voltage/Current Terminal AI1, Voltage/Current Terminal AI12, Communication
|Running command channel||Operation panel given,external terminal given, communication given, expansion card given.|
|Input command signal||Start, stop, FWD/REV, JOG, multi-step speed, reset, ACC/DEC time selection, frequency given channel selection, exterior fault alarm.|
|Protective function||Overvoltage, under-voltage, current limit, over-current, overload, electric thermal relay, overheat, overvoltage stall, data protection, rapid speed protection, input/output phase failure protection.|
|Environment||Install place||altitude ≤ 1000m,above 1000m down the rated amount, each increase of 100m down the rated mount of 1%;no condensation, ice ,rain, snow, hail; solar radiation below 700W/㎡, air pressure 70-106 kPa.|
|Temperature, humidity||-10 ～ + 50 ℃, derating above 40 ℃, maximum temperature 60 ℃ (no-load operation)5% to 95% RH (non-condensing)|
|Vibration||When 9～200Hz, 5.9m/s2(0.6g)|
|Storage temperature||-30 ～+50℃|
|Protection grade||IP20, (IP54 is avaliable)|
|Cooling method||Forced air cooling|
ZK hot selling SU100 series solar pump inverte MPPT efficiency more than 99%. Solar DC and Grid AC input.
Q1 : What is the solar water pumping Inverter?
ZK Solar pump inverter drives well all kind of water pump including single phase pump and PMSM in solar pumping system, solar DC and Grid AC input. MPPT efficiency more than 99%.
Q2: What should be noticed when installing inverter?
Install the Inverter in a place where is well ventilate,cool, dry and water-proof. long services life.
Q3: Do we need to set the parameter before using ?
Our inverter is AI intelligent working, can automatic tracking the DC bus voltage.
You can set parameters if you want other functions like Dry run, full tank detect.
Q4:Where is your factory located?
Our factory is located in Shenzhen, China, most welcome to visit us. We can pick up you from the Shenzhen Airport or High Speed Rail Station to our factory.
Q5:What is the supply capacity of your factory?
9000pcs inverters can be produced every month.
Export 7000-9000pcs inverters every month, to Thailand, India, Pakistan, the Middle East like Syria, Saudi, Yemen, Turkey, Egypt... All African and South America like Mexico, Brazil.
Sample be delivery around 3-5days, bulk order around 10-30 days.
Support OEM & ODM!