SG200 220V MPPT VFD Solar Pump Inverter With Dual Supply Mode
|Place of Origin:||China|
Payment & Shipping Terms:
|Minimum Order Quantity:||1|
|Price:||100-200usd per rated power|
|Packaging Details:||cartons package|
|Delivery Time:||1-7working days|
|Supply Ability:||1000pcs Per week|
|Voltage:||DC80-450||Current:||4A To 16A|
|MPPT:||Yes||Pumps Proteciton:||Over Voltage, Over Current, Shortcuit|
|IP Degree:||IP20||Efficiency:||Up Pt 99.5|
SG200 MPPT VFD Solar Pump Inverter,
220V MPPT VFD Solar Pump Inverter,
SG200 VFD Solar Inverter
SG200 solar pump inverter MPPT 0.75kw-4kw 220V pump VFD
SG200 Solar Pump inverter
The SG200 series solar pump inverter is a low voltage AC drive of 075KW to 4kw 220V above rating designed to operate with energy drawn from solar panel or photovoltaic cells (PV). The inverter is customized to operate in dual supply mode, so the grid connected supply is used in the absence of energy from PV cells. This drive functions with the latest in technology maximum power point tracking (MPPT) algorithm to derive maximum power from the PV cells at any instant.
SG200 solar pump inverter features
- Maximum power point tracking (MPPT) with fast response and stability operation, up to 99.80% efficiency.
- Enable to drive for 1 phase AC pumps or 3 phase 220VAC AC pumps
- Enable to drive for PMSM high speed and high efficiency pumps without motor ID auto tuning
- Dry run (under load ) protection, lowest speed auto tuning , Pumps maximum current protection, Minimum power input protection...
- The PQ (power/flow) performance curve enables to calculate the flow output from the pump
- Dual mode AC and DC power supply input is available
- Digital signal of water level sensor and analog signal of water level sensor for water tank fulling detect.
- Dedicated hardware design with dual CPU, independent air duct desige
- IGBT module such as Infineon, Fuji,TYCO , Star power to ensure good quality
- Enhanced lightning protection module
- GPRS remote control module for distance monitoring, control, parameters modification, and history data record..
- Efficiency is higher than 99.5%, power factory not less than 0.96 for below 15kw inverter.
SG320 series solar pump inverter compatible with dual supply mode
The solar pump inverter operates in dual supply mode either with a three phase input supply from the grid or with DC input supply from PV cells.
A four-pole changeover switch enables switching between the two supply modes. At a given time only one power supply (PV cell or grid) can be connected to the drive.
How does it work ?
An arrays of solar panels generates the power and voltage required for the SG300/3200 Solar inverter to drive the motor. The solar drive converts the DC voltage input to a 3-phase AC output with variable voltage and frequency. The MPPT algorithm of solar drive extracts maximum power available from the solar panels during the day and operates the motor at variable speed based on the power input to the drive. The frequency range in which the drive operates depends upon the motor speed, hydraulic system and the power available from the solar panel. As the sunshine varies during the day, power input to the drive varies and the Solar drive generates variable V/F ratio thus controlling the speed of the motor, which in turn regulates the pump impeller speed. Water Level Sensor is used only when the water is pumped to overhead tank.
• Pumping of water in for irrigation for drinking water supply in off grid areas, easy installation.
• Farmer can cultivate multiple crops through out the year in off grid areas
• Farmer can save their time spent in collecting and transporting water.
• Lower operation expense compared to diesel pumps
• Zero emission of green house gases.
• Reduced load on national grid.
|**Solar pump drive specification when FA-00 set to 1&2 for solar pumping controlling function.|
|Recommended MPPT voltage range||
Vmpp 131 to 350 VDC for 1S (90V to 350VDC input, 3PH 0-110VAC output)
Vmpp 280 to 375VDC for 2S ( 150V to 450VDC input, 3PH 0-220VAC output)
|Recommended input Voc and Vmpp voltage||
Voc 180(VDC), Vmpp 155(VDC) for 1S model or 110V AC pumps
Voc 355(VDC), Vmpp 310(VDC) for 2S model or 220V AC pumps
|Motor type||Control for permanent magnet synchronous motor and asynchronous motor pumps.|
|Rated output voltage||3-Phase,110V/160V/220V. 3-phase, 220V/380V/460V|
|Output frequency range||0~maximum frequency 600Hz.|
|Ambient temperature range||
G-type for submersible pumps, 150% rated current for 60s, 180% rated current for 2s
P type for general pumps, 120% rated current for 60s, 150% rated current for 2s
|Solar pump control special performance||MPPT ( maximum power point tracking), CVT (constant voltage tracking), auto/manual operation, dry run protection, low stop frequency protection, minimum power input, motor maximum current protection, flow calculating, energy generated calculating and water tank level detected|
|Protection function||Phase loss protection, phase short circuit protection, ground to phase circuit protection , input and output short circuit protection. Stall protection|
|Protection degree||IP20, Air force cooling|
|Running mode||MPPT or CVT|
|Altitude||Below 1000m; above 1000m, derated 1% for every additional 100m.|
AC input backup circuit
|CE, Design based on vector control drive S300 and S3200 series, more specification please refer to S300 or S320 vector control drive operation manual|