3 Phase 60A AC Output Reactor For VFD Copper Aluminum Core

3 Phase Copper Core AC Output Reactor For VFD

What is the AC input / output reactor: 

The input and Output AC reactor is a current-limiting device mainly used for the input / output side of the drive so as to protect the exchange drive from the influence of the transient overpressure. It can also reduce the surge and peak current .increase the real power factor ,restrain the harmonic wave in power grid and improve the function of the input current waveform, and extend the transmission distance from VFD / Solar pump inverter to motor.

High performance foil winding structure .low direct current resistance ,strong resistance to short circuit and good overload ability in short time characterizes this input AC reactor .For above class composite insulating materials are used to maintain reliable performance of the product under harsh working conditions, the design of the facility is characterized by low magnetic flux density ,excellent linearity and strong overload capacity ,Moreover, the cooperation of the design and vacuum pressure impregnation process reduces the noise of the reactor which also possesses the advantages of low consumption ,high efficiency of low temperature rise .the iron core employs the cold rolled oriented silicon steel sheet.

Technical data:

1.Rated operating Voltage: 1/3phase 220V 3phase 380/440V 50/60HZ.
2.Rated operating current: 5A to 1600A
3.Operating environment temperature:40ºC
4.Dielectric strength: Core-wingding 3000VAC/50Hz/5mA/10S
No flashover breakdown(factory test)
5.Insulation Resistance>1000VDC, Insulation resistance value >100MΩ.
6.Noise of the reactor is less than 65dB ( Tested at the point with a horizontal distance of 1 meter away from the reactor).
7.Level of protection:IP00
8.Insulation class: Above F
9.Executive standard of product:GB19212.1-2008,GB19212.21-2007.GB1094.6-2011.

Copper core 3phase 380V/440V output reactor Model No.: