Wireless 2G 4G WIFI Remote Pump Controller For Solar Pump Inverter

Product Description

GPRS Remote Controller For Solar Pump Inverter Realize Remote Wireless And Network Communication

GPRS Remote Controller overview

Gprs remote controller is a wireless date transmission terminal based on GPRS network, provides transparent date channel, can facilitate the realization of the remote, wireless and network communication.Make it easy for your device with Internet to connect by wireless. GT81 has a wide range of network coverage (it can be used anywhere you can use mobile phones), flexible and fast networking (installation can be used), low operation cost (billing according to the flow) etc.

GPRS Remote Controller feature

communication mode.

Supports backup data center.

Supports virtual private network(APN).

Remote wake-up: supports SMS and telephone.

Supports auto-connection while disconnect.

Support local, remote graphical interface parameter configuration and maintenance.

Supports SMS parameter configuration and maintenance.

With three kinds of interface: RS232, RS485 and TTL.
Supports 7bit, 8bit, 9bit data transmission.

Support parity, Mark, space check.

Multiple hardware and software reliability design, compound watchdog technology, make the equipment safe operation.

Functions of GPRS module establishing

1. Working status monitoring.

2. Inverter controling, start, stop, reset and running mode selection.

3. Parameters setting.

4. History working data record.

5. Location in google map.

Wiring:

1.Wire Rs485A, Rs485B to USB to serials port converter, and wires 24V, GND as well. GPRS module.

2. Find the correct series port in computer.

3. Install GPRS module configure software 'DTU set software.exe'.

4. Set 'COM' and press 'connect' to establish communication between computer and GPRS.

Application: